burncycle123
10-28-2009, 09:24 PM
Materials
- Long length of pvc pipe (mine is 1/2in thick)
- (8) 90* elbows 1/2in
- (2) 3 way peices 1/2in
1. First determine the length of you marker with tank and barrel on. Mine was around 30in.
2. Second make apropriate cuts for the sides that will hold the tank. (my cuts were 15in long)
3. cut the rest according to the marker than there you go.
I found this online somewhere but I went ahead and made my own.
http://i675.photobucket.com/albums/vv117/Burncycle123/stand001.jpg
http://i675.photobucket.com/albums/vv117/Burncycle123/stand002.jpg
- Long length of pvc pipe (mine is 1/2in thick)
- (8) 90* elbows 1/2in
- (2) 3 way peices 1/2in
1. First determine the length of you marker with tank and barrel on. Mine was around 30in.
2. Second make apropriate cuts for the sides that will hold the tank. (my cuts were 15in long)
3. cut the rest according to the marker than there you go.
I found this online somewhere but I went ahead and made my own.
http://i675.photobucket.com/albums/vv117/Burncycle123/stand001.jpg
http://i675.photobucket.com/albums/vv117/Burncycle123/stand002.jpg